Fiber patch cords are used to connect one device to another for signal transmission. The fiber jumper is a connector that is installed at both ends for the device only one end is equipped with a connector, which is a pigtail. Depending on the type of fiber, there are single mode jumpers and multimode jumpers. According to the structure of the connector, it can be divided into FC, SC, ST, LC, MTRJ, MPO, MU, E2000 and DIN.
FTTH Drop Cable
FTTH Drop Cable is commonly known as indoor hanging wiring cable. It is mostly single-core and double-core structure. It can also be made into a 4 or 8 cores structure with a cross-section of 8-shaped. The reinforcement is located at the center of the two circles. It can be made of metal or non-metal structure. The fiber is located in the geometric center of the 8-shaped shape. The fiber in the cable is made of G.657 small bending radius fiber, which can be laid at a bending radius of 20mm.
Duct Fiber Cable
The duct fiber optical cable is used for the outdoor cable in the access network or the customer premises network. Pipeline optical cable is generally used in urban areas. The environment in which the pipeline is laid is relatively good. Therefore, there is no special requirement for the cable sheath, and no armoring is required. The length of the laying section and the position of the splicing point must be selected before laying the pipe.
Field Installable Connectors
Field installable connector is the detachable quick connection between optical fiber and optical fiber devices, it is to put the two optical fiber end face together.
Fiber Closures
Optical fiber splice closure is widely applied to the connection of the fiber in sealing, protection, installation of fiber connector and storage. According to the structure character, the fiber optic splice closure can be classified to the Horizontal and Dome type.
Fiber Terminal Box
C168 offers a variety of terminal boxes with price and quality from 1core to 96 cores. The terminal box is used to separate and store the optical fibers in the fiber cable. By using one of the panels, the fiber can be spliced onto a single fiber on other cables, allowing the cables to be crossed and connected in a variety of ways. In addition, the panel creates a safe environment in which exposed fibers can be used.
FTTH ODN
The FTTx system consists of three parts: the central office equipment (OLT), the user terminal equipment (ONT), and the optical distribution network (ODN). As an important part of the FTTx system, ODN is the optical transmission physical channel between the OLT and the ONU. The ODN consists of five parts: the feeder segment, the cable distribution point, the wiring segment, the cable access point and the household segment. From the ODF rack of the central office room to the feeder section of the cable distribution point, as the trunk optical cable, to achieve long-distance coverage from the distribution point of the optical cable to the wiring section of the user access point, the nearest optical fiber is allocated to the user area along the feeder cable. The user access point connects to the user terminal to achieve FTTH.The main passive optical components include Fiber Patch Cords, WDM, Splitter Distribution Box, Fiber Patch Panel, Outdoor Fiber Cabinet, Indoor Optical Distribution Frame, Fiber Terminal Box, Fiber Closure, Fiber Connector, Network Cabinet, etc.
Splitter Distribution Box
Outdoor splitter distribution box is used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system. It integrates fiber splicing, splitting, distribution, storage and cable connection in one unit. Meanwhile, it provides solid protection and management for the FTTx network buildings which can provide the entire infrastructure fiber products from backbone to building connections, for every possible variant of FTTH network, while also providing hardware such as FTTH boxes, outdoor splitter/distribution boxes, patch panels, and fiber closures for use in FTTH projects. C168 can provide splitter distribution box from 2 cores, 4 cores, 8 cores, 12 cores, 16, 24, 36, 48 cores to 72 cores and also can provide customized service for all of our customers.
Fiber Accessories
C168 offers all kinds of optic fiber test equipment (visual fault locators, ON optical power meters, optical light source), tool kits (optic hand tool bags, FTTH quick termination kits anaerobic field termination kits), cable preparation tools (cable cutters, precision fiber cleavers), fiber cleaning solutions equipment & consumables.
Splicer Protection Sleeves
60mm Single Fiber 40mm Single Fiber
40mm 12 Ribbon Fiber
Visual Fault Locator
This visual fault locator uses a 650nm wavelength semiconductor laser to inject visible red light into the fiber. By observing the light leakage position on the fiber under test, the position of the fiber fault point can be easily and accurately determined. This product is used in conjunction with the OTDR to compensate for the shortcomings of the OTDR near-end blind zone. In addition, in the multi-core cable, ribbon fiber test, can be used as a core control
OTDR Launch Cable Box
OTDR Launch Cable Box is designed to aid in the testing of fiber optic cable when using an OTDR. The OTDR Launch Fiber box is used with Optical Time Domain Reflectometers (OTDRs) to help minimize the effects of the OTDRs launch pulse on measurement uncertainty. Available in many different configurations and fiber length
Temporary Bare Fiber Connector
High Precision Bare Fiber Connector V type slot
fiber optic connector designed for temporary jointing of single optical fiber by using
fiber holder.
Fiber Optic Splitter
Fiber Optic Splitter in the era of optical communication is a component of forming PON network, It is a passive device used to connect OLT and ONU, its function is to distribute downlink data, and to concentrate uplink data.According to different spectral theory, splitter can be divided into PLC splitter and FBT splitter.
Network Cabinet
The 19-inch network cabinet is applied to computer network integrated engineering, building wiring, telecommunications, radio and sound engineering, intelligent community, school, government and other economic and large and medium-sized wiring projects. The equipment can be used to place active and passive devices such as switches, routers, servers, 19-inch optical fiber terminal boxes, etc. WE provide 12U,14U,18U,22U,27U,32U 37U,42U 47U network cabinets with glass door or mesh front door.
Other Network Products
We are a reseller for other Networking products and Equipment
- APC by ScHneider Electric - panduit
LTE Solutions
In telecommunication, Long-Term Evolution (LTE) is a standard for high-speed wireless communication for mobile devices and data terminals, based on the GSM/EDGE and UMTS/HSPA technologies. Products offered
